BD Diesel Cool Down Timer Kit v2.0 For K-Type EGT Probe

Turbochargers operate at high temperatures. The Cool Down Timer is designed to keep the engine running when the ignition is turned off to prevent turbocharger bearing failure that could occur when the engine is shut down, stopping the cool lubricating oil flowing to the turbocharger while it is still hot.

Product information

If the oil flow is shut off too early, the remaining oil in the bearing housing will overheat causing coking of the bearings which causes both premature bearing wear and reduced oiling of the bearings. Allowing the engine to idle to a minimum operating speed gives the turbocharger time to cool down.

The CDT is adjustable for up to 5 minutes of idle time, or optionally works with any K-Type EGT probe for temperature-based shutdown.

Specifications

• Manufacturer part number: 1081160
• Application years: Universal
• Sold as: Kit
• Country of origin: CA

Application and ordering notes

• Cool Down Timer Kit v2.0 For K-Type EGT Probe
• Additional supplier application details: 1994-2010 Ford F-250/ F-350 Super Duty 2001-2014 Silverado/Sierra 2500/3500
• Review the engine, fuel-system configuration and component details before ordering.
• Universal or component-specific application: verify dimensions, connections and required components. This does not mean direct fitment to every vehicle.

Installation

Supplier-listed installation time: 3 Hours. Actual labor varies with vehicle condition and installation requirements.

Warranty

Supplier-listed warranty: 12-Months/24,000 Miles. Review the applicable coverage, exclusions and claim requirements.

Shipping and emissions information

Supplier statement: This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Verify applicability to your exact vehicle and configuration before purchase.

Proposition 65 warning

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov