ProTect68 Pressure Control Kit - Dodge 2007.5-2017 6.7L 68RFE Transmission
ProTect 68 Trans Pressure Control kit delivers 150% of the torque holding force to stock transmissions like no others can. Industry leading exclusive custom valve body separator plate and gaskets substantially reduces cross leaks compared to stock and other applications, even with much higher line pressures. Electronic Pressure Control module that delivers up to 250 PSI clutch apply pressure providing 150% of the holding force prevents clutch slippage. All of this without modifying the transmission pump or removing the transmission. Controller dynamically adjusts the hydraulic apply pressures based on turbo boost/engine load and ramps up the much larger sweep right up to 250 PSI mainline pressure as needed - dependent on engine load which creates turbocharger boost dynamically. This is not accomplished with any other aftermarket engine tuner. Installation takes 2-to-3 hours to complete without having to do a full transmission relearn since no internal tolerances have changed. A "fresh" stock transmission will have the ability to handle up to 500hp. For higher power or demands, a complete BD 68RFE transmission with additional clutches and new designed components is recommended.
Make | Model | Engine | Year |
---|---|---|---|
Dodge | Ram 2500 | 6.7 | 2007, 2008, 2009, 2010 |
Dodge | Ram 3500 | 6.7 | 2008, 2009, 2010 |
Ram | 2500 | 6.7 | 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 |
Ram | 3500 | 6.7 | 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 |
You must login to post a review.
Write the First Review!