Upgrade the weak factory clutch in your 1999-2003.5 Ford F-250 7.3L Power Stroke equipped with the ZF6 6-Speed manual transmission using the South Bend 1944-6OFER organic/feramic dual-friction single disc replacement clutch kit (no flywheel). Engineered specifically for this engine and transmission combination, this kit delivers smoother engagement, far better holding power, and long-term durability over the original setup.
This is a REPLACEMENT kit and does NOT include a flywheel - it is designed for trucks that already have a South Bend solid-mass flywheel installed. If your truck still has the factory flywheel, you will need the version of this kit that includes one. Rated for approximately 475 hp, 1000 ft-lbs, 25,000 lbs towing.
The South Bend 1944-6OFER is a organic/feramic dual-friction single disc replacement clutch kit built specifically for 1999-2003.5 Ford F-250 trucks running the 7.3L Power Stroke engine paired with the ZF6 6-Speed manual transmission. This is one of the most critical fitment details on these trucks - the same year and engine combination was offered with multiple transmissions, so always confirm your transmission code before ordering.
The organic friction lining gives you smooth, street-friendly engagement and excellent heat resistance for towing and daily driving. The dual-friction Organic/Feramic disc delivers a bump in holding power while staying surprisingly civil for a daily driver. The sprung hub design absorbs drivetrain shock at engagement and protects your transmission and driveline from harsh take-offs.
| Year Range | 1999-2003.5 |
|---|---|
| Make / Model | Ford F-250 |
| Engine | 7.3L Power Stroke |
| Transmission | ZF6 6-Speed (ZF-6) |
| Disc Type | Single Disc |
| Disc Material | Organic/Feramic Dual-Friction |
| Disc Size | 13" |
| Hub Style | Sprung Hub |
| Flywheel Included | No (Repair kit for kits that already have South Bend flywheel 167323) |
| Hydraulics Included | No |
| HP Rating | 475 hp |
| Torque Rating | 1000 ft-lbs |
| Towing Capacity | 25,000 lbs |
| Recommended Use | Stage 2 Endurance / Performance Street & Heavy Towing |
The 1944-6 series fits only the 1999-2003.5 7.3L Power Stroke with the ZF6 (ZF S6-650) 6-Speed manual. If your 1999-2003 truck has the ZF5 5-Speed, you need a 1944-5 series kit instead. If your truck has an automatic (E4OD, 4R100), this kit is not for you.
IMPORTANT - REPLACEMENT KIT ONLY: This part number is a replacement kit and does NOT include a flywheel. It is designed for trucks that already have a South Bend solid-mass flywheel installed. It will NOT work with the factory OEM flywheel. If your truck still has the stock flywheel - or you don't know - choose the matching full kit (the version of this part number that ends in -K, -OK, -OFEK, etc.) instead, or call us before ordering.
This is a repair/replacement kit only. It does NOT include a flywheel and is intended for use with a South Bend Clutch flywheel (PN 167323) or compatible aftermarket flywheel. It will not work with the OEM flywheel. Recommended for modified trucks, not for stock applications.
If you are seeing any of these symptoms, replace the clutch before further transmission or driveline damage occurs.
12,000 Mile | 12 Month Warranty from the date of purchase, covering manufacturing defects in materials and workmanship. Applies to the original purchaser only. Proper installation, break-in, and flywheel resurfacing (when reusing a flywheel) are required for warranty validity. For exact terms refer to South Bend Clutch's current warranty policy at time of purchase.
Q: What trucks does the 1944-6OFER fit?
A: This kit is designed for 1999-2003.5 Ford F-250 with the 7.3L Power Stroke engine and ZF6 6-Speed manual transmission. See the application notes above if your year/engine combination came with more than one transmission.
Q: How much power and towing can it handle?
A: South Bend rates this kit for approximately 475 hp, 1000 ft-lbs, 25,000 lbs towing. Real-world capacity depends on driving style, tune, and supporting modifications.
Q: Do I need to buy a flywheel separately?
A: Yes - this is a replacement kit that does NOT include a flywheel. It is designed for trucks that already have a South Bend solid-mass flywheel installed. If your truck still has the OEM flywheel, choose the full kit with flywheel included or contact us for guidance.
Q: Is this clutch OK for daily driving?
A: Yes - the disc material and pressure plate are tuned for street-friendly engagement and reasonable pedal effort. Aggressive race-style clutches usually carry the ceramic or full-face puck designation; this kit is built for daily use, towing, and mild performance.
Q: What is the recommended break-in period?
A: South Bend typically recommends 500-1,000 miles of easy, mixed driving with no hard launches or heavy towing so the friction surfaces properly seat. Skipping the break-in can void your warranty.
Q: Do I need anything else to install it?
A: We strongly recommend inspecting and replacing the hydraulic master and slave cylinders, pilot bearing, and checking the throwout bearing fork at the same time. Always use the alignment tool included in the kit. If you are reusing a flywheel, it must be properly resurfaced.
Total Reviews (0)You must login to post a review.
Write the First Review!