TrackTech Complete Top End Cylinder Head Gasket / Studs Service Kit For 89-98 5.9L Cummins 12V

TrackTech Complete Top End Cylinder Head Gasket / Studs Service Kit

Fitment

89-98 5.9L Dodge Cummins 12V

TrackTech Head Stud Kit SKU: TTC8998HS009

(Please See The Installation Instructions In The Technical Documents Section Of This Listing.)

• (20) Cylinder Head Studs (Shorter)
• (6) Cylinder Head Studs (Longer Exhaust side location outside of the valve cover)
• (26) Cylinder Head Stud Nuts
• (26) Cylinder Head Stud Washers

The highest tensile strength in class TrackTech Head Studs are manufactured with the highest tensile strength in the industry at 240,000 PSI.  They are tested in several ways including in the lab using a state-of-the-art UTM machine validating 240k PSI tensile strength. Plus, on the track where racers put TrackTech fasteners through the most demanding conditions making these head studs the race-proven choice for your 5.9L Dodge Ram Cummins 24v.

• 240,000 PSI Tensile Strength
• UTM Machine Tested and Validated
• Lab, Bench, Street and Strip Tested

MAHLE HEAD GASKET SET

• 1 Head Gasket
• 12 Valve Stem Seals
• 6 Valve Cover Gaskets
• 6 Valve Cover Bolt O-Ring
• 1 Intake Plenum Gasket
• 2 Carbon Steel Grid Heater Gaskets
• 6 Exhaust Manifold Gasket
• 1 Turbo Flange Gasket
• 1 Turbo Drain Gasket
• 1 Turbo Outlet O-Ring
• 1 Thermostat Housing Seal
• 4 Banjo Bolt Sealing Washers for Injector Pump
• 1 Complete Injector Reseal Kit
• 1 Intake
• 6 Injector O-rings
• 6 Return Line Seals
• 6 Chamber Tip Gaskets

For this application there you will need to modify and machine your rocker arms to gain the right clearance when installing the new TrackTech Head Stud Kit. Taking your truck apart and looking for a shop that is willing to do this delicate job is inconvenient and time-consuming. We know both you and your truck work hard and time is precious so we developed these custom machined Rocker Arms that will save you time, money, and aggravation.

TrackTech Machined Rocker Arm Pedestal For 89-98 5.9L Cummins 12V SKU: TTC8998RA701

Supplemental Parts

Since this is a major repair we suggest using the best available hardware to get the job done right the first time. Here are some supplemental items our customers have chosen when opting to complete this repair: Thermostat, CCV Filter, Fuel Filter, Oil Change, Coolant Change, Engine Air Filter

TrackTech Exhaust Manifold  Studs SKU: TTC8920ES431
TrackTech Exhaust Manifold To Turbo Studs SKU: TTC8907ES430
TrackTech Tappet Cover Bolts SKU: TTC8902VT732

For A Bottom End Repair You Will Also Need The Following

If the repair requires the removal of pistons or the crankshaft you will need the following in addition to the parts outlined above. Timing Cover Gaskets, Front Crank Seal, Rear Crank Seal, Pistons or Piston Rings, Rod Bearings, Main Crank Bearings etc.

TrackTech Connecting Rod Bolt Set SKU: TTC8902CB301
TrackTech Main Stud Kit SKU: TTC8998MS139

Cross Reference

• HSU 9332
• HSU9332
• FP3802245
• HS4068B
• HS4068A
• 247-4203
• 3802245
• 3804897