Ford 6.0L Powerstroke ICP Sensor & Connector Kit (2004.5-2010)

ICP Sensor and Connector Kit for 2004.5-2010 Ford 6.0L Powerstroke Diesel

The ICP or Injection Control Pressure sensor is mounted in the passenger valve cover. Hight heat and vibration along with a 4,000 psi working pressure is tough on ICP sensors. Some common failures are erratic pressures / voltages, external oil leaks and even no start concerns. Typically the sensor will leak oil into the electrical connector and run up the wiring requiring the replacement of the pigtail. We have this kit to solve that problem with all the parts necessary to replace your ICP sensor and connector and get you back up on the road. 

Fits: 2004.5 to 2010 Ford Powerstroke Diesel - NOTE: 2008-10 6.0L engines were only found in the Econoline Vans. Pickups Had a 6.4L Engine.

For use with the sensor located in the passenger valve cover. AKA Wavy Rail Style.

Features

• Quality OEM Style Sensor
• Sensor and Connector Kit
• Direct Replacement
• 2 Year Warranty
• Free Shipping!

Common Fault Codes Associated with a Failed ICP Sensor

• P2285 - ICP Sensor Circuit Low
• P2286 - ICP Sensor Circuit High
• P2290 - ICP Pressure Too Low
• P2291 - ICP Pressure Too Low - Engine Cranking

Cross Reference

Ford OEM: 4C3Z-9F838-B, 4C3Z-9F838-A, 4C3Z-9F838-AB, 4C3Z9F838A, 4C3Z9F838AB, 4C3Z9F838B
Navistar OEM: 1845427, 1845427C2, 1845428, 1845428C92, 1845428C93

Other