Fitment
08-10 Ford Powerstroke 6.4L Diesel
TrackTech Head Studs are manufactured with the highest tensile strength in the industry at 240,000 PSI. They are tested in several ways including in the lab using a state-of-the-art UTM testing machine validating 240k PSI tensile strength. Plus, on the track where racers put TrackTech fasteners through the most demanding conditions making these head studs the race-proven choice for your truck.
Because this is a extensive top end repair we suggest using the best available replacement parts to get the job done right the first time.
Here are some supplemental items our customers have chosen to replace during this repair:
Maintenance Replacement or Upgrade:
If you have the dreaded P0088 code, replacement of the injection pump is required. Double check base fuel pressure prior to repair. Should be 5-10 psi.
For P012F code the Engine Oil Cooler needs to be replaced. Anything consistently over 235F oil temp needs to be changed.
Feel free to call us with any questions, we are true pro's and can pretty much answer any questions.
***FYI We do NOT sell any Delete parts***
If the repair requires the removal of pistons or the crankshaft you will need the following in addition to the parts outlined above. Timing Cover Gaskets, Front Crank Seal, Rear Crank Seal, Pistons or Piston Rings, Rod Bearings, Main Crank Bearings etc.
You must login to post a review.
Write the First Review!