Zibbix™ pressure sensors are the only sensors on the market directly from the OE supply base, produced on OE production lines, under OE quality control, packaged and sold directly to the aftermarket. EBP (exhaust back pressure) sensors live in one of the harshest environments a sensor can live in, interfacing with hot engine exhaust that is full of oily soot. Zibbix™ Sensors use modern, patented technologies and the highest-grade materials available in the market, period. Zibbix EBP sensors are designed to withstand higher temperatures and harsher operating conditions than the OEM sensor was capable of. The Zibbix sensor implements high-grade materials for superior strength and corrosion resistance, upgraded internal technology, as well as upgraded Dupont® thermoplastic material in the electrical connector capable of withstanding higher temperatures in the engine compartment. Lastly, these parts are designed with an o-ring at the crimp joint, which is machine-pressed into the sensor’s metal housing and robotically crimped for uniformity. The OE parts (and most aftermarket parts) use inferior RTV silicones and other adhesives, laid in a bead along the crimp joint to make their environmental seal. Our o-ring design at the crimp joint creates a 360° static compression seal, far superior to any other environmental seal found in these types of sensors. Without a strong environmental seal, over time, moisture makes its way into the sensor, leading to short-circuiting and failure. Zibbix EBP sensors are backed by an industry-leading 5-year warranty – that’s 3 years longer than a replacement ICP sensor from the dealership… Your buying decision is an easy one. Zibbix, Sensors You Can Trust.™
7.3L 6.0L 1994-2004 Ford Powerstroke
7.3L 1994-2003 International Navistar T444E
8.7L 7.6L 1998-2003 International Navistar DT530 DT466
Ford OEM: 4C3Z-9J460-A,
Motorcraft OEM: DPFE-1, DPFE-3
Navistar OEM: 1840078C1, 1850353C1, 1850353C2
MAP Sensor For 1998–2003 International Navistar DT466E / DT530E Vehicles
Please Check The Location Of Your Sensor Before Purchasing; This Sensor Mounts On A Bracket On The Thermostat. If Your Sensor Mounts On A Bracket On The Driver’s Side Head, This Is Not The Right Sensor For You. If this is the case, please use: ZBX-3102, ZBX-3102-TK4, or ZBX-3102-PK5
Check Engine Data Plate Located On the Passenger Side Valve Cover BEFORE Purchasing. If the Engine Data Plate Is Missing, Please Send Us The Last 8 Digits of Your VIN.
F-Series And Excursion: 6,000,000 – 6,344,942
E-Series: Prior to 149,760
Total Reviews (0)You must login to post a review.
Write the First Review!