1989-1998 Dodge Cummins 5.9L 12 Valve Street Performance Cylinder Head
MUST USE PDM-4068C GASKET KIT WITH HEAD
Street Performance Cylinder Head Features:
The Industrial Injection 5.9L 12 valve Cummins Street Heads are designed for the daily driver/weekend warrior in mind. Fully CNC ported heads, fully loaded and ready to bolt on.
Heads are first jet-washed in a high-pressure spray cabinet to remove oil and dirt, then glass-beaded to remove carbon. Next, they are checked by magnafluxing (cast iron only) or pressure testing. They are visually inspected for defects that would make them unusable. Valve guides and seats are removed as needed for porting.
Port development is accomplished using a SuperFlow 600 flow bench with a computer recording all flow measurements.
Many things are considered when designing a cylinder head Port; air flow is only one of the things to think about. Another major concern is port wall thickness.
Anyone can get a head to produce high flow numbers, but if doing so leaves the port wall too thin, the casting will crack. High-performance diesel heads are more prone to cracking because of the thermal shock experienced from excessive intermittent or long-term exhaust temperatures.
The porting is then pre-formed using a new 5 Axis CNC Cylinder Head Porting Machine with CAD/CAM software specifically designed for cylinder head porting. CNC porting brings unparalleled accuracy to head porting, with each port flowing the same. This helps balance the power that each cylinder produces, making tuning easier.
New High Strength Alloy, Heat-treated iron-based valve guides are installed. These guides are heat-treated to the Rockwell 22 Scale, which produces the ultimate in wear resistance. This is far superior to the original guide material, including Bronze. The guide incorporates a spiral groove inside the guide to hold oil and aid the lubrication of the valve during engine operation.
Guides are then honed (not reamed) to exact size using a diamond honing mandrel. Diamond abrasives allow for consistency of size, surface finish, and bore geometry with no variation from guide to guide. The guide size is then verified using a valve guide bore gauge.
As needed, the head receives new Premium valve seat inserts made from a true Nickel-Based Non-Magnetic material that was developed for extreme operating conditions.
Next, the head is treated to a multi-angle valve job to help maximize the flow of air in and out of the head. This is accomplished using a Serdi 100 guide and seat machine. Serdi uses a solid carbide, straight shank pilot. When inserted into the valve guide, it simulates the real valve stem during the centering process. This guarantees the valve seat is finished for a perfect valve-to-seat match.
Using CBN or Diamond tooling, the head is given a new surface. With our Berco milling machine, we can control the surface finish to accommodate different head gasket types. For example, MLS head gaskets require a very smooth surface finish.
Finally, the head is jet-washed, dried, and assembled with new valve seals and new performance valve springs.
MUST USE PDM-4068C GASKET KIT WITH HEAD
Total Reviews (0)You must login to post a review.
Write the First Review!