Norcal Diesel Performance - Fuel Injection & Parts

New addition to the Industrial Injection Performance Diesel Machine Line of products

This is the LB7 Duramax Billet Injector Hold Down kit

Built from Heat Treated High Alloy Billet Steel
Comes with ARP install bolt kit
Comes with a center aligning washer to allow for proper install every time.
Torque ARP bolts to 55FT. Lbs and use the ARP lube 

Do It Yourself Parts Kit For 2001-2004 LB7 Stock Injection Pump

It Will Gain 19% More Fuel And About 50HP

Easy Bolt on Installation Ensure Just About Anyone Can Do This Upgrade

Contains

• Ported Gear Housing
• Rail Pressure Fitting
• Pressure Regulator (MPROP)

Designed To Accommodate Larger Injectors. Do Not Exceed 20% Increase In Flow.

This product fits the following vehicle configurations:

This product fits the following vehicle configurations:

This product fits the following vehicle configurations:

This product fits the following vehicle configurations:

This product fits the following vehicle configurations:

This product fits the following vehicle configurations:

This product fits the following vehicle configurations:

Alliant Power Injector Hard Line Kit - Set of 8

Includes

• (2) AP63720 Cylinders 1 & 8
• (2) AP63721 Cylinders 3 & 6
• (2) AP63722 Cylinders 4 & 5
• (2) AP63723 Cylinders 2 & 7

Get the most fuel flow possible from your stock CP3 pump by eliminating possible cavitation damage to CP3 pump from excessive suction required by high pressure CP3's fuel injection pump with this high flow PPE CP3 Pump Inlet Fitting.

The key is the larger inner diameter of the PPE fitting, which allows fuel to flow 70 percent more efficiently than with the restrictive stock 1/4 inch inlet fitting. With a greater volume of fuel available to it, the CP3 injection pump will be able to perform at its optimum capability.
Features:

• 70 percent more flow over stock
• Stainless steel

Applications: 6.6L GM Duramax Diesel, Dodge 6.7L
Note: 3/8 inch version is the maximum fuel pump inlet size.
1/2 inch fitting allows for 1/2 inch hose reduced to 3/8 inch fuel pump inlet.
3/8 inch
Note:Legal In California Only For Racing Vehicles That May Never Be Used, Or Registered Or Licensed For Highway Or Off-Road Use.

Get the most fuel flow possible from your stock CP3 pump by eliminating possible cavitation damage to CP3 pump from excessive suction required by high pressure CP3's fuel injection pump with this high flow PPE CP3 Pump Inlet Fitting.

The key is the larger inner diameter of the PPE fitting, which allows fuel to flow 70 percent more efficiently than with the restrictive stock 1/4 inch inlet fitting. With a greater volume of fuel available to it, the CP3 injection pump will be able to perform at its optimum capability.
Features:

• 70 percent more flow over stock
• Stainless steel

Applications: 6.6L GM Duramax Diesel, Dodge 6.7L
Note: 3/8 inch version is the maximum fuel pump inlet size.
1/2 inch fitting allows for 1/2 inch hose reduced to 3/8 inch fuel pump inlet.
3/8 inch
Note:?áLegal In California Only For Racing Vehicles That May Never Be Used, Or Registered Or Licensed For Highway Or Off-Road Use.

DTech Injector Return Line Gaskets DT660020 LB7 Duramax 6.6 - Services One Bank

Includes

• (4) Injector Return Line Gaskets
• (1) Return Line to Head Gasket

1 Year Warranty

Two kits needed for full set of 8 injectors

PPE introduces a new design makeover for our Dual Fueler Kits. Now available as a bold and stylish upgrade to the PPE Dual Fueler Kit already installed on your rig, or included in your choice of style as standard equipment in all PPE Dual Fueler Kits.
Made from machined billet aluminum and then anodized for strength and style.

The new PPE Dual Fueler Pulley Wheel features a more robust design with machined spokes to dress up your engine bay.
Features:

• Dual Fueler kit includes all necessary parts for bolt-on installation
• New BOSCH Duramax LBZ/LMM CP3 pump assembly with heavy-duty mounting hardware
• Billet aluminum drive pulley with 6V-grooves/ribs
• Microprocessor controller for seamless integration
• High and low pressure fuel lines
• Fuel rail adapters and fittings
• Retains factory safety pressure relief valve

PPE introduces a new design makeover for our Dual Fueler Kits. Now available as a bold and stylish upgrade to the PPE Dual Fueler Kit already installed on your rig, or included as standard equipment in all PPE Dual Fueler Kits. Made from machined billet aluminum and then anodized for strength and style.

The new PPE Dual Fueler Pulley Wheel features a more robust design with machined spokes to dress up your engine bay.
Features:

• Machined billet aluminum
• Anodized for strength and style
• Machined spokes to dress up your engine bay
• Application: 816 Style GM (113061071)

Dual Fueler Race Valve (M20-1.5 to M14-1.5) included in the PPE Dual Fueler Kits for GM 6.6L Duramax diesel engines and is available sold separately.
Application: 2001-2016 GM 6.6L Duramax

Duramax 01-04 LB7 injector line Set: Full Set of 8 brand new lines. Not remanufactured or knock-offs like many others currently on the market. Beware of cheap injector lines, they are well known for having poor quality coatings and poor fitment which will results in fuel leaks.

The fuel injector lines on the LB7 are notorious for rusting and causing issues with the injectors. For this reason we highly recommend replacing your injector lines while changing injectors or nozzles if the lines have not been changed within the last 40,000-50,000 miles.

Details:

• Liter: 6.6
• Engine: LB7 Duramax
• Years: 2001-2004
• Fuel Type: Diesel
• Condition: New
• Not For Sale In California

INJECTOR INSTALL SEAL KIT

Kit includes return line seals as well as injector o-rings and copper gasket at base of injector. Each kit will service 4 injectors, you will need two of these for a complete injector job.

SERVICES FOUR INJECTORS

Fuel Injector Cup For 2001-2004 Duramax LB7 - OEM GM Part 97188463

Fit: 2001-2004 Chevy GMC Duramax 6.6L LB7 

Often when replacing injectors the cups will come out with the injector. We recommend replacing the cup and sealing it with sleeve installer such as Permatex 7651149 or Red Locktite

O-rings not included. 2 required per cup OEM#94051259.

Have a question? Give us a call at 888-290-3820

Eliminate the low fuel rail pressure diagnostic trouble codes in your 2001-2004 GM 6.6L Duramax LB7 with the XDP Duramax LB7 Fuel Rail Plug XD335. The XD335 features a solid design and eliminates the possibility of fuel being returned to the fuel tank.

As a result, you get consistent fuel rail pressures so you have the fuel you need to support hard acceleration, aftermarket tuning, and other performance upgrades. Each plug comes ready to install and is CNC machined from 304 stainless steel.
Features:

• Fuel Rail Plug
• Machined From 304 Stainless Steel
• Eliminates Low Fuel Pressure Trouble Codes

Warranty Info:
Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit.

GM Fuel Injector Cup O-ring Kit Set of 16 2001-2004 6.6L Duramax Diesel 94051259

• Set of 16  Injector Cup Seals 
• 2 Seals Req Per Cup
• Genuine GM Parts

When using LBZ left and right bank manifolds on early trucks, these mounts solve the fuel rail fitment issue. Includes washers and mounting bolts.
Features:

• Fuel Rail Mount Kit
• Aluminum construction
• Left and Right Side
• Includes washers and mounting bolts
• Sold As A Kit

Applications:

• 2001-2005 GM 6.6L Duramax LB7|LLY (115051600)

Mahle Valve Cover Gasket Set and Injector Install Kit 

Includes

• Valve Cover Gaskets
• Injector Cup O-rings
• Injector Body O-rings
• Injector Copper Seals
• Silcone Sealant

OEM or better quality

1 Year Warranty

This is a complete set of brand new fuel lines for the 2001-2004 LB7 Duramax

We recommend ordering a set of these lines when purchasing new injectors.

Through years of doing warranty work and working on these model trucks we have found that most contamination of the injectors after install is from the injector lines not being cleaned well enough or at all.

These lines take a lot of abuse and doing a new set is a great insurance towards the life of the injectors. 

Order the new lines with a set of injectors. 

The PPE Race Fuel Valve, made from stainless steel, replaces stock or a shimmed pressure relief valve.

This valve helps maintain fuel rail pressure during high engine load conditions. It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient pressure relief valve (PRV) spring pressure.

This leads to the valve opening too early which causes excessive amounts of fuel to be returned to the tank.
Details:

• Race Fuel Valve
• Replaces stock pressure relief valve
• Stainless Steel
• Sold Individually

Applications:

• 2001 - 2004 Chevy GMC 6.6L Duramax LB7 (113072800)

Tracktech Injector Cup Set of 8

Fitment

01-04 6.6L Chevy GMC Duramax

Cross Reference

• 94051259
• 97188463

TrackTech Fuel Injector Return Banjo Bolt Kit 01-04 LB7 Duramax

Fitment

01-04 6.6L Chevrolet Duramax LB7

Content

• (8) Injector Banjo Bolt
• (8) Injector Banjo Washer

These are commonly overlooked replacement parts when servicing the fuel injectors on the LB7 Duramax engine; however, we suggest that these bolts be replaced. It is cheap insurance in making sure there are no weak spots in this vital system.
A leak here can cause cross-contamination and result in fuel in the oil which reduces the oil’s effectiveness and protection and can lead to a “Run Away Diesel” scenario.

Cross Reference

• 97228929
• 97228933
• 97600925
• 98065992
• AP0059