Norcal Diesel Performance - 6.6L LLY Axles & Components

Features:

• Installation is simple, the kit plugs in under the hood
• No wire cutting or splicing
• Kit comes with an illuminated rocker switch for control and to indicate when the front axle is being overridden
• Designed to allow the operator to manually disable the front wheel drive mechanism by holding the hubs in the free (2WD) mode with the transfer case in 4WD low range
• By allowing the front wheels to be disengaged, maximum torque is available to the rear wheels
• This will also allow for sharp "All The Way Over" turns without the front axle u-joint hopping or binding
• With this kit installed, the front wheels will NOT be driven through the transfer case
• Allows to have full power and torque while in a high gear reduction applied to the rear axle(s) only

Warranty:

Parts

• 12-Months
• 12,000 Miles

Applications:

Other differential covers are large and bulky resulting in lubricating oil being flung off the ring gear. BD's design deflects the oil back onto the ring gear and into the pinion gear for cooler longer life.

Features

• Engineered cover design keeps oil on the gears
• Deflects oil back onto the ring gear and into the pinion gear for cooler longer life
• Extra capacity sump located at bottom for gears to pick up oil
• Internal and external cooling fins
• Stainless steel allen head cap bolts, fill plug
• Magnetic drain plug
• Gasketless cover has integral re-usable Viton O-Ring
• Dodge (2003-up) with AA14-11.5 differential
• Chevy (2001-up) with AA14-11.5 differential

Warranty

Parts

• 36-Months
• 150,000 Miles

Note

Applications

• Consistent 1/4 mile times are now much easier
• Preset your best Turbo Boost or engine RPM launching parameter
• Keep holding your accelerator pedal on the floor then release your brake pedal for consistent launches
• Eliminate over or under boost launches
• Great for all racers especially bracket racers
• Kit comes with factory and universal connections with dash mounted controls
• It's an easy install!

Warranty

Parts

• 12-Months
• 24,000 Miles

Having issues wearing out CV Axles? DmaxStore has the solution, this extended travel CV axle assembly was designed for the rigorous abuse that Duramax owners put their trucks through with the added stresses caused by modifications to the vehicle the stress on the stock components can often lead to failures. This axle allows for a full 47 degrees of articulation versus the 23 degrees that the factory axle allows, making it perfect for leveled and lifted applications. The thermoplastic elastomer boots offer better life than many of the other boots on standard CV axles. The advantages of these thermoplastic elastomer boots include: ideal flex fatigue characteristics, exceptional tear resistance, protection against water and a wide temperature capability. The upgraded cages, races and bearings allow for smooth operation even at the highest degree of articulation unlike some competitors, this is achieved by the 8 bearing joint versus the factory 3 bearing joint that can limit the articulation and smooth operation of the CV axle. This axle also carries a lifetime warranty against defect and workmanship so you can rest assured your parts hold up ot the test of time. 

Features:

• Extended Travel
• Higher Articulation Angle
• Thermoplastic Elastomer Boots
• Upgraded Cages, Races & Bearings
• 8 Ball Socket Design for greater strength and durability 
• Lifetime Warranty

Includes:

• 1 - CV axle shaft for left or right side
• 1 - CV axle nut washer
• 1 - CV axle nut, self locking

Specs:

Compressed Length: 21 3/4" (55.245 cm)

DmaxStore Note: 36mm socket needed for CV axle nut removal.

(Dmax XD Lifetime Warranty) Dmaxstore XD Steering and suspension parts come with a no questions asked Lifetime warranty to the original purchaser. If a failure occurs, Dmaxstore will replace the failed part only once it has been received at our facility. Shipping costs are not included under the warranty. Some standard wear is not covered.

GM Front TufShafts. TufShafts are a direct replacement upgrade shafts for any 2001-2010 GM 2500-3500 with a 9.25 inch AAM front axle. They are designed to eliminate the stock passenger side split axle shaft that is prone to breaking under high torque situations, as well as the short drive side axle shaft that is prone to breaking under high torque situations as well.

The TufShafts are made from high strength HyTuf material for maximum strength and reliability.

Note: The TufShaft do not incorporate an axle disconnect, so the front driveshaft will spin when the vehicle is in motion, but with the front differential unlocked the truck will turn and drive like normal.
Details:

• 2001-2010 GM 2500-3500 with a 9.25 inch AAM front axle

Help keep your 2011-Present GMs front differential running cool and clean with an upgraded differential cover from PPE. With the largest set of cast cooling fins in the industry, found both inside as well as outside the pan, >PPEs differential covers offer fluid cooling capabilities not often matched. This pan also holds an extra three-quarter quart of fluid, offering a bit of added stamina on those long hauls.

To keep the fluid clean, PPE installed its exclusive high-powered Neodymium magnet equipped fill plug will pull harmful ferrous metal particles right out of the oil before they have a chance to attack the bearings.
Features:

• Heavy-Duty Aluminum Rear Differential Cover - Black (138051020)
• Neodymium magnet equipped fill plug
• Internal and external cooling fins
• Stainless steel Allen head fasteners
• Black Powdercoat Finish
• Sold As A Kit

Includes:

• Zinc-plated mounting bolts (M8 x 30 x 1.25 Allen head bolt)
• 3/8 inch O-ring sealed drain plug
• 1 inch stainless steel Neodymium Magnetic sight level/fill plug with Viton O-Ring Seal
• CMP-4000 high performance gasket
• 2 tapped ports 1/8 and 1/4 inch temperature probes

Applications:

• 2001-Present GM 2500HD/3500HD trucks with 14 bolt 11.5 inch rear axle
• 2003-2013 Dodge 2500HD/3500HD trucks with 14 bolt 11.5 inch rear axle
• 2014-2016 Dodge 2500HD/3500HD trucks with leaf springs (will not fit trucks with coil springs)

Note:

• Available in 3 finishes: Raw (138051000) - Brushed (138051010) - Black (138051020)

Help keep your 2011-Present GMs front differential running cool and clean with an upgraded differential cover from PPE. With the largest set of cast cooling fins in the industry, found both inside as well as outside the pan, >PPEs differential covers offer fluid cooling capabilities not often matched. This pan also holds an extra three-quarter quart of fluid, offering a bit of added stamina on those long hauls.

To keep the fluid clean, PPE installed its exclusive high-powered Neodymium magnet equipped fill plug will pull harmful ferrous metal particles right out of the oil before they have a chance to attack the bearings.
Features:

• Heavy-Duty Aluminum Rear Differential Cover - Brushed (138051010)
• Neodymium magnet equipped fill plug
• Internal and external cooling fins
• Stainless steel Allen head fasteners
• Brushed Finish
• Sold As A Kit

Includes:

• Zinc-plated mounting bolts (M8 x 30 x 1.25 Allen head bolt)
• 3/8 inch O-ring sealed drain plug
• 1 inch stainless steel Neodymium Magnetic sight level/fill plug with Viton O-Ring Seal
• CMP-4000 high performance gasket
• 2 tapped ports 1/8 and 1/4 inch temperature probes

Applications:

• 2001-Present GM 2500HD/3500HD trucks with 14 bolt 11.5 inch rear axle
• 2003-2013 Dodge 2500HD/3500HD trucks with 14 bolt 11.5 inch rear axle
• 2014-2016 Dodge 2500HD/3500HD trucks with leaf springs (will not fit trucks with coil springs)

Note:

• Available in 3 finishes: Raw (138051000) - Brushed (138051010) - Black (138051020)

Help keep your 2011-Present GMs front differential running cool and clean with an upgraded differential cover from PPE. With the largest set of cast cooling fins in the industry, found both inside as well as outside the pan, >PPEs differential covers offer fluid cooling capabilities not often matched. This pan also holds an extra three-quarter quart of fluid, offering a bit of added stamina on those long hauls.

To keep the fluid clean, PPE installed its exclusive high-powered Neodymium magnet equipped fill plug will pull harmful ferrous metal particles right out of the oil before they have a chance to attack the bearings.
Features:

• Heavy-Duty Aluminum Rear Differential Cover - Raw (138051000)
• Neodymium magnet equipped fill plug
• Internal and external cooling fins
• Stainless steel Allen head fasteners
• Raw finish provides optimum heat transfer.
• Sold As A Kit

Includes:

• Zinc-plated mounting bolts (M8 x 30 x 1.25 Allen head bolt)
• 3/8 inch O-ring sealed drain plug
• 1 inch stainless steel Neodymium Magnetic sight level/fill plug with Viton O-Ring Seal
• CMP-4000 high performance gasket
• 2 tapped ports 1/8 and 1/4 inch temperature probes

Applications:

• 2001-Present GM 2500HD/3500HD trucks with 14 bolt 11.5 inch rear axle
• 2003-2013 Dodge 2500HD/3500HD trucks with 14 bolt 11.5 inch rear axle
• 2014-2016 Dodge 2500HD/3500HD trucks with leaf springs (will not fit trucks with coil springs)

Note:

• Available in 3 finishes: Raw (138051000) - Brushed (138051010) - Black (138051020)

KRYPTONITE SPINDLE O-RING 2001-2010

Fits; 2001-2010 Chevy/GMC 2500/3500 HD Truck

Part# 568-346

This Kryptonite Inner Spindle O-Ring is a direct replacement for your current GM part. Our O-Ring is meant to provide a barrier to protect the wheel bearing and axle of internal corrosion. 

We recommend replacing this with every Wheel Bearing replacement as it is easy to reach and will prevent corrosion on your new bearings. Lightly grease before install.

kryptonite Wheel Bearing

Fits 2001-2007 Gm Classic 1500, 2500 3500 Single Rear Wheel And 2002-2009 Hummer H2

Our Wheel Bearings Are The Highest Quality Replacements Available.

Exclusively From Kryptonite and Designed To Handle Higher Stresses Put On Your Truck From Larger Tires And Lift Kits.

• Distinctive Ball And Taper Bearing Arrangement.
• Reduced Deflection Of Hub Face Provides Better Braking and Handling.
• Improved Steering Accuracy And Behavior.

We Have Been Using And Abusing These Bearings On Our Personal Trucks For Years And Its Because of That We Feel Comfortable Offering Our Lifetime warranty! Each Bearing Comes With 8 New Wheel Studs And Abs Brake Sensor. This Is A complete Bolt In Unit and Fits Both Right And Left Spindles, On Both 2x4 And 4x4 Heavy Duty 8 Lug Trucks.

Average Install Time Is Around 2 Hours Each.

kryptonite Wheel Bearing

fits 2001-2007 Gm 3500 Classic Dual Rear Wheel

our Wheel Bearings Are The Highest Quality Replacements Available.

exclusively From Kryptonite and Designed To Handle Higher Stresses Put On Your Truck From Larger Tires And Lift Kits.

• distinctive Ball And Taper Bearing Arrangement.
• reduced Deflection Of Hub Face Provides Better Braking and Handling.
• improved Steering Accuracy And Behavior.

we Have Been Using And Abusing These Bearings On Our Personal Trucks For Years And Its Because of That We Feel Comfortable Offering Our Lifetime warranty! Each Bearing Comes With 8 New Wheel Studs And Abs Brake Sensor. This Is A complete Bolt In Unit and Fits Both Right And Left Spindles, On Both 2x4 And 4x4 Heavy Duty 8 Lug Trucks.

average Install Time Is Around 2 Hours Each.

KRYPTONITE WHEEL BEARING SPINDLE BOLT ZINC PLATED (KR1571)

Part# KR1571

Fits; 2001-2010 Chevrolet and GMC 1500HD / 2500 / 2500HD / 3500 / 3500HD 2WD/4WD trucks, 2001-2013 Chevy and GMC 2500 2WD/4WD SUVs and Hummer H2, H2 SUTs.1999-2018 Chevy/GMC 1500 6 Lug Trucks

These zinc plated bolts attach the wheel bearing to the spindle, they require 133 Ft Lbs of torque when installed, which is why we recommend replacing them when changing out you wheel bearing.

These bolts are notorious for wear and rust so we decided to get them zinc plated to prevent any form of oxidation. We always recommend replacing these when changing your Wheel Bearings for easy access.

Sold Individually. There are 4 per side on your 8 Lug truck, and 3 per side on your 6 Lug Truck.

Kryptonite Wheel Hub Dust Cap

Fits: Most All 8 Lug Gm Trucks From 1999-2010

Everyone Who's Ever Replaced A Wheel Bearing On The Gm Truck Knows This Pesky Cap Is Impossible To Remove Without Damaging In Beyond Use For Re Installation. Now We Have The Solution, Great Look, Durable, Black Oxide Coated Wheel Hub Dust Caps From Kryptonite.

* This Listing Is For Dust Cap Only, Bearing Not Included.

With its significantly higher density than most other types of synthetic rubber, the Viton O-Ring is chosen for its performance, chemical resistance and longevity. If you are replacing or upgrading your seal, this is the obvious choice.
Features:

• 1 Inch O-Ring
• Fits our Magnetic Drain/Fill Plugs
• Viton Rubber
• Black
• Sold Individually

Applications:

• Fits 1 Inch Drain/Fill Plugs