Norcal Diesel Performance - 6.6L LML Steering And Suspension Parts

Bilstein B8 5100 (Steering Damper) is designed as an upgrade to factory steering dampers on trucks and SUVs. Utilizing our proven design, these steering dampers are able to dampen minute movements in the steering and reduce steering vibrations that naturally occur, especially in older vehicles. These steering dampers are zinc coated for resistance to harsh elements and match to all B8 5100 series products. B8 5100 (Steering Damper) will offer a significant improvement in steering, handling and comfort.

When upgrading to our Race Pitman and Idler Arm, the stock center link must be drilled to accept the 7/8 inch bolt that is used with our Race Idler and Pitman Arms. We offer a pre-drilled stock center link that retains the bushing to maintain the feel of factory steering.
Features:

• 7/8 Inch Drilled Center Link With Bushing (158000111)
• Use when upgrading to our Race Pitman and Idler Arm
• Retains bushing to maintain the feel of factory steering
• Sold Individually

Applications:

• 2011-2016 GM 2500HD/3500HD Trucks

For 2011-2016 GM/Chevy 2500/3500HD trucks, we offer a center link that is pre-drilled to 7/8 inch to accept our Race Pitman and Idler Arms.

This center link is for applications that do not have the factory bushing.
Features:

• 7/8 Inch Drilled Center Link w/Out Bushing (158000112)
• Use when upgrading to our Race Pitman and Idler Arm
• Sold Individually

Applications:

• 2011-2016 GM 2500HD/3500HD Trucks

These tie rods are overkill for some, but when it comes to steering components, failure is not an option.

These tie rod assemblies are the best of the best. Featuring 1.5 inch wide forged tie rod, massive 2 1/3 inch ball joints and a much larger and stronger, adjustable inner ball joint.

Outer tie rod end contains a spring-loaded gusher bearing that maintains constant pressure.
Features:

• Stage3 Tie Rod Assemblies (158031511)
• Dramatically improves strength
• Forged Steel Tie Rod Assemblies
• Sold As A Pair

When compared to factory components:

• 30 percent larger toe adjusting shaft
• 53 percent larger tie rod body
• 35 percent larger outer ball joint
• 28 percent larger, adjustable inner ball joint

Applications:

• 2011-Present GM 2500HD/3500HD Trucks

Note:

• PPE Stage3 Tie Rods are engineered to fit GM stock steering components
• Some aftermarket steering manufacturers have changed the placement of the tie rod mounting perch on the front spindle, which then requires a shorter tie rod
• The Stage3 Tie Rod outers are fully-threaded internally, and may be trimmed to accommodate the relocated aftermarket perch location
• An experienced installer should measure to determine the appropriate trim length

KRYPTONITE UPPER AND LOWER BALL JOINT PACKAGE DEAL (For Aftermarket Control Arms) 2011-2021

Part# 1119BJPACK-2

Fits; 2011-2021 Chevy/GMC Truck 2500HD/3500 With Aftermarket Bolt on Ball Joint Style Control Arms ONLY!

Includes:

2-Kryptonite Lower ball joints (Part# KR0232)

2- Kryptonite Bolt-In Upper ball joints (Part# KR6292)

Details:

• Designed to replace the factory ball joints that are prone to premature wear on lifted vehicles with large off-road tires
• Fully greaseable metal on metal design
• Machined bearing housing made from sintered graphite, bronze, and 1045 steel for a strong, smooth, bearing surface
• Ball joint stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life
• Ball joint boot is made from tear/wear resistant silicone polyurethane
• Outperforms the factory ball joint assembly and includes all necessary hardware for installation

These Ball Joints are designed specifically for heavy-duty use, they will handle the toughest work that you can throw at them while delivering excellent performance. These Ball Joints have a durable Black Oxide Finishing on it to resist corrosion and maintain performance integrity. All of our ball joints and rod ends come pre-greased and ready to install with premium Chevron Ultra EP2 Grease.

(Kryptonite No Fine Print Lifetime warranty ) Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, sled pull it, wreck it, lift it, level it, lower it, I think you get it? We don’t care. If you can break it we will replace it.  Your Kryptonite products must be purchased from an authorized dealer to have warranty coverage. 

kryptonite Bolt-in Upper Ball Joint (for Aftermarket Upper Control Arms) 1999-2018

fits 1999-current Chevy/gmc 1500hd/2500hd/3500 Trucks And Much More, This Is A Popular Upper Ball Joint For Many Aftermarket Applications.

part # KR6292

includes:

• 1x Kryptonite Bolt-in Upper Ball Joint

Available in Black ONLY

this Ball Joint Will Fit Kryptonite Upper Control Arms For Any Year Or Model Truck, Also Cognito Upper Control Arms, And Will work With Fabtech Tubular Upper Control Arms With A Bolt In Upper Ball Joint. heavy Duty Thick Rubber Boot Provides Extreme Protection Against The Elements For Longer Ball Joint Life. Exclusive Grease Relief Port Makes Keeping These Joints Lubricated Properly Nice And Easy. Largest Ball Stud On The Market, And The Most Angle Clearance Available.

these Ball Joints Are Compatible Anywhere Moog K6292 Is Required. 

*yes, Our Upper Ball Joints Do Carry A Lifetime Warranty!

 (kryptonite No Fine Print Lifetime Warranty ) kryptonite Steering And Suspension Components Are Warrantied For Life To Their Original Purchaser. This Warranty Is Against Any Manufacturer Defects, Premature Wear Or Breakage. race It, Jump It, Off Road It, Sled Pull It, Wreck It, Lift It, Level It, Lower It, I Think You Get It? we Don’t Care. If You Can Break It We Will Replace It. Your Kryptonite Products Must Be Purchased From An Authorized Dealer To Have Warranty Coverage.  

KRYPTONITE CAM BOLT KIT 2011-2021

KRYPTONITE DEATH GRIP IDLER ARM 2011-2019

Fits; 2011-Current Chevy/GMC 2500/3500 HD

Part# 11KDG018

If you demand the absolute best for your truck this is it!

Details:

• Housing CNC machined from solid billet steel
• Heat treated 4140 chromoly stud
• Dual sealed roller bearings
• Made in the USA
• Works with PISK kit

The Kryptonite steering Death Grip Idler Arm is the best way to strengthen and improve your trucks steering with zero reduction in turning radius. This amazing Idler arm utilizes a sealed double roller bearing system that requires no maintenance and is backed with our lifetime warranty. This idler arm can be used with lifted, leveled or lowered suspension. The Death Grip idler can be used in combination with any factory GM or Kryptonite center link or steering product designed to fit the 2011-Current Chevrolet or GMC 2500/3500 HD. This design will work with PISK3008 brace kit.

KRYPTONITE DEATH GRIP IDLER ARM SUPPORT 2011-2019

Fits; 2011-2019 GM HD Trucks, 2500HD-3500

Part# KR280

CLICK HERE FOR COMPLETE INSTALLATION INSTRUCTIONS

This Hard Core Idler arm support with roller bearings is the latest and greatest from Kryptonite Products. It provides steering improvements and reduced play and looseness on most Chevy / GMC Heavy Duty Trucks.

Chevy/GMC trucks, Vans and SUVs have suffered from lazy steering and premature component and tire wear. These problems are worsened by lift kits and larger tires. You can improve your steering response and reduce component wear on your Chevy / GMC Heavy Duty Truck by upgrading the factory idler arm support with the Kryptonite Death Grip.

The Kryptonite Death Grip Idler arm support features strongest on the market cast aluminum housing and heavy-duty tapered roller bearings to reduce play and eliminate "steering slop." A direct replacement for the factory part, the Kryptonite Death Grip Idler arm support is a compatible steering upgrade Made In The USA and comes with all necessary mounting hardware.

CLICK HERE FOR INSTALLATION INSTRUCTIONS

Fitment:

• 2011+ Silverado/Sierra 2500 HD, 3500 & 3500 HD (2wd & 4wd)
• FITS TRUCK ONLY!

Does Not Fit

• 01-10 - Silverado/Sierra 1500HD, 2500, 2500HD & 3500
• 01-16 - 2500 Suburban / 2500 Yukon XL / 2500 Avalanche
• 03-09 - Hummer H2
• 1500 Light Duty

(Kryptonite No Fine Print Lifetime warranty ) Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, sled pull it, wreck it, lift it, level it, lower it, I think you get it? We don’t care. If you can break it we will replace it. Your Kryptonite products must be purchased from an authorized dealer to have warranty coverage.

Kryptonite Death Grip Idler Side Package

Fits 2011-2021 Chevy/GMC 2500/3500 HD TRUCK

Part# KRISP11

Most of the play in the steering system on Heavy Duty GM Trucks is on the Idler side, this package will decrease play in the Idler side and solidify your steering feel. This combination of parts will bullet proof you idler side steering.

• 1 x Kryptonite Death Grip Idler Arm
• 1 x Kryptonite Idler Support 
• 1 x Kryptonite Idler Support Frame Gusset 

 
The Kryptonite steering Death Grip Idler Arm is the best way to strengthen and improve your trucks steering with zero reduction in turning radius. This amazing new Idler arm utilizes a sealed double roller bearing system that requires no maintenance  and is backed with our lifetime warranty. This idler can be used with lifted, leveled or lowered suspension. The Death Grip idler can be used in combination with any factory GM or Kryptonite center link or steering product designed to fit the 2011-2017 Chevrolet or GMC 2500/3500 HD. This design will work with PISK3008 brace kit.

Idler Arm Benefits:

• Housing machined from solid piece billet steel
• Heat treated 4140 Chromoly stud
• Dual sealed roller bearings
• Made in the USA

Idler Support benefits:

• Reduces Steering Play
• Improves Steering Control
• Cuts Down Driver Fatigue
• Provides For Safer Driving
• Made In the USA

Frame Gusset Benefits:

• Constructed of 1/4" Plate Steel
• Made In the USA

KRYPTONITE DEATH GRIP PITMAN ARM 2011-2019

Part# KR419A

Fits; 2011-2019 Chevy/GMC 2500HD/3500 GM Trucks

If you demand the absolute best for your truck this is it.

Details:

• Heat treated 4140 Chromoly Stud
• Oversize Heavy Duty Internals
• Designed to work directly with PISK Bracket

Now available, the Kryptonite steering Death Grip Pitman Arm is the best way to strengthen and improve your trucks steering with zero reduction in turning radius. This amazing Pitman arm utilizes heavy duty oversize internals and is backed with our lifetime warranty. This Pitman arm can be used with lifted, leveled or lowered suspension. The Death Grip Pitman Arm can be used in combination with any factory GM or Kryptonite center link or steering product designed to fit the 2011-2019 GM HD Series Trucks, contact us with any questions.

 (Kryptonite No Fine Print Lifetime warranty ) Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, sled pull it, lift it, level it, lower it, I think you get it? We don’t care. If you can break it we will replace it. Your Kryptonite products must be purchased from an authorized dealer to have warranty coverage.  

KRYPTONITE DEATH GRIP TIE RODS 2011-2021 (For Fabtech RTS Lift Kits)

Fits; 2011-2021 2500/3500 GM HD Trucks equipped with a Fabtech RTS Style Lift kit that utilizes an alternate size outer rod end only!

Part# KRTR11-FT

*These Tie rods are built Specifically for the 2011-2021 GM HD Trucks Equipped with a Fabtech RTS Style Lift kit that utilizes an alternate size outer rod end only!

*Will Not Fit an OEM Knuckle. 

CLICK HERE FOR COMPLETE INSTALLATION INSTRUCTIONS

Engineered exclusively for the extreme demands of today's heavy duty truck.  Built with pride in the USA to work with stock or modified suspension. Kryptonite tie rods will fit any 2011-2021 2500/3500 GM HD Truck that has the center link mounted in the factory location and has Fabtech aftermarket knuckles. Using superior components and engineering, these tie rods easily outperform the competition.This pair is for use with your factory center link.

These Tie Rods can easily be upgraded later to pair with our SS Series Center Link.

CLICK HERE TO SEE CENTER LINK UPGRADE KIT

Details:

• Heat treated chromoly nickel outer studs.
• Bulletproof, all steel inner ball sockets. 
• Solid 1 1/4" Hexagon steel body.
• Left and Right hand jam nuts for the ultimate adjust ability.

In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite Death Grip tie rods. The OEM tie rods fail at 9000 pounds of pressure.  The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite Death Grip tie rods held up to an incredible 21000 pounds of pressure before pulling apart.

(Kryptonite No Fine Print Lifetime warranty)-Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, sled pull it, wreck it, lift it, level it, lower it, I think you get it? We don’t care. If you can break it we will replace it.

All Kryptonite tie rods are pre-greased with Chevron's ultra duty EP2 (Extreme Pressure) grease they should be serviced with this grease at each oil change. Your Kryptonite products must be purchased from an authorized dealer.

KRYPTONITE DEATH GRIP TIE RODS 2011-2021

Fits; 2011-2021 2500/3500 GM HD Truck

CLICK HERE FOR COMPLETE INSTALLATION INSTRUCTIONS

Part# KRTR11

Tie Rod Bodies come Powder Coated black and laser engraved.

Now available exclusively in black boots

Disclaimer: This product will not work with fabtech lift kits due to their proprietary spindle design that utilizes there outer tie rod.

Engineered exclusively for the extreme demands of today's heavy duty truck.  Built with pride in the USA to work with stock or modified suspension. Kryptonite tie rods will fit any 2011-2021 2500/3500 GM HD Truck that has the center link mounted in the factory location. Using superior components and engineering, these tie rods easily outperform the competition.This pair is for use with your factory center link.

These Tie Rods can easily be upgraded later to pair with our SS Series Center Link.

CLICK HERE TO SEE CENTER LINK UPGRADE KIT

Details:

• Heat treated chromoly nickel outer studs.
• Bulletproof, all steel inner ball sockets. 
• Solid 1 1/4" Hexagon steel body.
• Left and Right hand jam nuts for the ultimate adjust ability.

In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite Death Grip tie rods. The OEM tie rods fail at 9000 pounds of pressure.  The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite Death Grip tie rods held up to an incredible 21000 pounds of pressure before pulling apart.

(Kryptonite No Fine Print Lifetime warranty)-Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, sled pull it, wreck it, lift it, level it, lower it, I think you get it? We don’t care. If you can break it we will replace it.

All Kryptonite tie rods are pre-greased with Chevron's ultra duty EP2 (Extreme Pressure) grease they should be serviced with this grease at each oil change. Your Kryptonite products must be purchased from an authorized dealer.

Kryptonite Extreme Idler Support Frame Gusset

Fits 2011+ Chevy/GMC 2500/3500 HD

Part# KRGUSSET11

Engineered exclusively for the extreme demands of the Heavy Duty GM Truck. Built with pride in the USA to work with stock or modified suspension. Using superior components and engineering, our Kryptonite Death Grip Idler Support Frame Gusset easily outperforms the competition.

Prevents frame flex at the factory idler support. Will work with factory or aftermarket idler supports. Direct bolt in installation on idler side of gusset, frame side will need to be welded directly to frame for maximum performance.

kryptonite Wheel Bearing

• distinctive Ball And Taper Bearing Arrangement.
• reduced Deflection Of Hub Face Provides Better Braking and Handling.
• improved Steering Accuracy And Behavior. We Have Been Using And Abusing These Bearings On Our Personal Trucks For Years And Its Because of That We Feel Comfortable Offering Our Lifetime warranty! Each Bearing Comes With 8 New Wheel Studs And Abs Brake Sensor. This Is A complete Bolt In Unit and Fits Both Right And Left Spindles, On Both 2x4 And 4x4 Hd 8 Lug Trucks. Average Install Time Is Around 2 Hours Each.

kryptonite Wheel Bearing

• distinctive Ball And Taper Bearing Arrangement.
• reduced Deflection Of Hub Face Provides Better Braking and Handling.
• improved Steering Accuracy And Behavior. We Have Been Using And Abusing These Bearings On Our Personal Trucks For Years And Its Because of That We Feel Comfortable Offering Our Lifetime warranty! Each Bearing Comes With 8 New Wheel Studs And Abs Brake Sensor. This Is A complete Bolt In Unit and Fits Both Right And Left Spindles, On Both 2x4 And 4x4 Hd 8 Lug Trucks. Average Install Time Is Around 2 Hours Each.

kryptonite Wheel Bearing

• distinctive Ball And Taper Bearing Arrangement.
• reduced Deflection Of Hub Face Provides Better Braking and Handling.
• improved Steering Accuracy And Behavior. We Have Been Using And Abusing These Bearings On Our Personal Trucks For Years And Its Because of That We Feel Comfortable Offering Our Lifetime warranty! Each Bearing Comes With 8 New Wheel Studs And Abs Brake Sensor. This Is A complete Bolt In Unit and Fits Both Right And Left Spindles, On Both 2x4 And 4x4 Hd 8 Lug Trucks. Average Install Time Is Around 2 Hours Each.

kryptonite Wheel Bearing

• distinctive Ball And Taper Bearing Arrangement.
• reduced Deflection Of Hub Face Provides Better Braking and Handling.
• improved Steering Accuracy And Behavior. We Have Been Using And Abusing These Bearings On Our Personal Trucks For Years And Its Because of That We Feel Comfortable Offering Our Lifetime warranty! Each Bearing Comes With 8 New Wheel Studs And Abs Brake Sensor. This Is A complete Bolt In Unit and Fits Both Right And Left Spindles, On Both 2x4 And 4x4 Hd 8 Lug Trucks. Average Install Time Is Around 2 Hours Each.

KRYPTONITE LOWER BALL JOINT

Replacement Lower ball joint for your 2011+ 2500HD/3500 GM HD Trucks

Part# KR0232

Includes:

• 1-KR0232 Lower Ball Joint - Black Boots

Fits Either Right Or Left Lower Control Arm

KRYPTONITE SERIES SOLID STEEL - ZINC PLATED - TIE ROD SLEEVES

2011-Current GMC/Chevrolet 2500/3500 HD

Part# KRSLV11

Will not fit with aftermarket tie rods
Will not fit Moog Severe Duty Tie Rods

Tie rod sleeves go over your OEM tie rods on your steering system for added performance and strength. This kit fixes the toe in and out problem associated with the stock steering system.  

Features:

• Tie rod sleeves made to fit OEM Inner Tie rods Only
• Tie rod sleeves are Zinc Plated to resist corrosion.

Includes:

• 1 x Right Kryptonite tie rod sleeve
• 1 x Left Kryptonite tie rod sleeve

Kryptonite SS Series Center Link/Tie Rod Package

Fits 2011-2021 Chevy/GMC 2500/3500 HD

Part# KRCLP11

CLICK HERE FOR CENTER LINK INSTALLATION INSTRUCTION DOWNLOAD

Disclaimer: Will not work with Fabtech Lift Kits.

This insanely strong Center Link has been engineered to maintain all factory alignment specs and steering geometry. This steering system is modeled after the Center Link on the H1 Military Hummer, this is a much stronger design when compared to whats offered from factory on all non Hummer GM HD Trucks. Can be used with GM or aftermarket Idler/Pitman arms. Will work with Cognito PISK support system.

Note: Center Link can not be used with lift kits that drop the center link from the factory location.

Includes:

• 1 x Kryptonite Series Solid Center Link
• 2 x Kryptonite Series Tie Rods 

Details:

• Size: 1- 5/8 inch Hexagonal

• Material: 1144 Stress Proof Carbon Steel.

• Finish: Black Powdercoat

KRYPTONITE HEAVY DUTY SWAY BAR END LINKS (0-2")

Fits; 2001-2019 Chevy/GMC 1500HD/2500HD/3500 TRUCKS and Much More, This universal fit end link can fit most other GM Truck including the 1999-2006 1500 Trucks and SUV's

Part# KRSWEL02

Kryptonite Heavy Duty Sway Bar End Links 
 
Fits 1999-current Chevy/gmc 1500/2500/3500 HD

11" Long sway Bar End Links For A 4"-6" Lifted Truck (Will Not Work With Fabtech Or Pro Comp Lift Kits)

Part# KRSWEL46

Click Here For Installation Instructions 

These Sway Bar End Links Are A Heavy Duty Upgrade For Lifted Trucks. Our End Links Utilize A Lower Clevis System Which Takes Some Of The Angle Off Of The Link When The Suspension Is Cycling. Minimizing Stress That Can Cause Breakage.  They Are Used For Lifted Trucks With 4"- 6" Of Lift And Are 11" Hole To Hole, Please Be Sure To Select the Correct Length For Your Truck. They Allow Extra Clearance For Our Larger Diameter Tie-rod Upgrade. 

*** Please double check the length of your links as show in this image ***

Due to High return rate for incorrectly ordered parts some packages make be reboxed.

Don't worry, we check every package for the correct contents and damage during repacking.

Kryptonite Heavy Duty Sway Bar End Links 
 
Fits 1999-Current Chevy/GMC 1500/2500/3500 HD

7"-9" Lifted Hd Sway Bar End Links (Will Not Work With Fabtech Lift Kit)

Part# KRSWEL79

Total Installed Length is 14" from the base of the control arm to the center of the sway bar. See image for details.

Click Here For Installation Instructions 

Kryptonite Ultimate Front End Package

Fits: 2011-2021 CHEVY/GMC 2500/3500 HD

Part# ULTIMATE11

Tie Rod Bodies and Center Links now come Zinc plated under the Black Powdercoat to decrease corrosion, Then Laser Engraved

Note: Will not work with Fabtech Lifts, or others that utilize there own size outer tie rod end. 

Note:  If installing KRYPTONITE series centerlink on a leveled or lifted truck you may need to install longer swaybar endlinks depending on how high the torsion bars have been adjusted.  We recommend the Kryptonite HD swaybar endlinks. This kit will only work on trucks that keep the center link in the factory position. If your truck has been lifted make sure the lift kit you have is a spindle style kit not a control arm drop.This steering system is modeled after the Center Link on the H1 Military Hummer, this is a much stronger design when compared to whats offered from factory on all non Hummer GM HD Trucks.

CLICK HERE FOR CENTER LINK INSTALLATION INSTRUCTION DOWNLOAD

The Kryptonite Death Grip Pitman Arm, is currently in development It is because of this we are temporarily substituting with the Strong and Proven Moog Severe Duty Pitman Arm. Stay tuned for the release of our newly designed exclusive Kryptonite Pitman Arm.

Kit Includes:

• Kryptonite SS Series Center Link
• Kryptonite Death Grip Tie Rods
• Kryptonite Death Grip Idler Arm
• Kryptonite Death Grip Idler Arm Support
• Kryptonite Extreme Idler Support Gusset
• Kryptonite Death Grip Pitman Arm

(Kryptonite Lifetime warranty) Kryptonite will replace any failed Kryptonite part purchased from us for as long as you own the vehicle. For all claims members must present proof of purchase. For replacement please call or email for shipping instructions prior to warranty claim. New replacement parts will be shipped via UPS ground when failed unit is received, shipping will not be covered.

(Kryptonite Lifetime warranty)(Moog Parts)- Kryptonite customers purchasing MOOG problem solver replacement parts.  Kryptonite will replace any failed MOOG part purchased from us as long as you own the vehicle. For all claims Customers must present proof of purchase. For replacement please complete the warranty claims form Here New replacement parts will be shipped via UPS ground when failed unit is received, shipping will not be covered.

Fits 2011-2019 Chevy/GMC 2500/3500 HD Truck

Part# KRUCA11

DOWNLOAD INSTALLATION INSTRUCTIONS HERE

Kryptonite Upper Control arms are made from laser cut steel, then machine formed and precision welded for ultimate strength. Our control arms are built with pride here in small town USA and backed with a lifetime warranty. Kryptonite UCA kits will improve the ride of any leveled or lifted GM 2500-3500 HD truck. Also a great upgrade for your stock height truck. Kryptonite UCA's are compatible with any stock or leveled 2500-3500 HD and most suspension lift kits.

Kit Includes:

• Kryptonite Upper Control Arm Pair
• 4 x Control arm Bushing sleeves
• 8 x Control arm Bushings
• 2 x Kryptonite Bolt in Upper Ball joints (Black Boots)
• 1 x Hardware package

*Optional Upgrade - See Options Below

KRYPTONITE CAM BOLT KIT 

SUPERIOR TOP LOCK WITH NORD-LOCK STYLE FLANGE NUT, YOU CAN'T FIND A MORE SOLID CAM BOLT KIT ON THE MARKET. KEEP YOUR FRONT END ALIGNMENT IN CHECK WITH KRYPTONITE.

• 1 x Kryptonite Cam Bolt Kit Part# KR86376
  • The Kryptonite cam bolt kit is recommended to be replaced on and trucks located in a harsh climate or on any truck with high miles. The easiest time to replace the cam bolt kit is when replacing the upper control arms.  The kryptonite cam bolt kit will allow for an additional -1.5º to +1.5º of additional camber adjustment.  

*Cam Bolt Kit will Not Work with an Upper Control arm drop lift kit. They will only fit if your Upper Control arms remain in the stock location. Contact us with any questions regarding this.

Note; Access to grease fittings on your upper control arms can often be a pain. We have eliminated this problem by changing the locations on our newest version of the upper control arms from Kryptonite. The hardware kits with your arms include multiple grease fittings as well as grease port plugs. This allows you to have great service ability no matter how your upper control arms sit.

• Note; When running stock wheels with oversized tires clearance is limited and may rub control arm. Please contact us prior to purchasing if running this set up.

KRYPTONITE SS SERIES CENTER LINK (UPGRADE) 2011-2020

Fits; 2011-2020 Chevy/GMC 2500/3500 HD

Part# KR11SSU34/78

CLICK HERE FOR CENTER LINK INSTALLATION INSTRUCTION DOWNLOAD

This insanely strong center link has been engineered to maintain all factory alignment specs and steering geometry. This steering system is modeled after the Center Link on the H1 Military Hummer, this is a much stronger design when compared to what's offered from factory on all non Hummer GM HD Trucks. Can be used with GM or aftermarket Idler/Pitman arms. Will work with PISK support system. This system can be added on to the kit, see options. This system is a upgrade for customers who already have Kryptonite tie rods on a factory center link. This PISK Support Kit will only fit a factory or Kryptonite Center Link, only in the factory position.

Important: Do to the nature of our industry we are constantly striving to provide our customers with the latest and the strongest technology available. Over the last several years our Tie Rods have changed Significantly. When Purchasing this Center Link upgrade package, please be aware of 2 different tie rod sizing options. Do your tie rod bodies take 3/4" Threads, or 7/8" Threads? Please verify before placing your order with us, and select the appropriate option for your truck.

Includes:

• 1 x Kryptonite Series Solid Center Link
• 2 x Kryptonite Series Inner Tie Rod Ends (For Use With Kryptonite Tie Rods Only)

Details:

• Size: 1- 5/8 inch Hexagonal
• Material: 1144 Stress Proof Carbon Steel.
• Finish: Black Powdercoat

Tensile Strength
115,000 psi (Min.)
Yield Strength
100,000 psi (Min.)

VS

4140-4130 chromoly steel
Tensile Strength
85,000–110,000 psi
Yield Strength
70,000–85,000 psi

(Kryptonite Lifetime warranty ) Dmaxstore will replace any failed Kryptonite part purchased from us for as long as you own the vehicle. For all claims members must present proof of purchase. For replacement please call or email for shipping instructions prior to warranty claim. New replacement parts will be shipped via UPS ground when failed unit is received, shipping will not be covered.