Home - Dodge Cummins Diesel Parts - 2019-2023 Ram 6.7L 24V Cummins - Ram 6.7L Fuel System and Components
Click on image to zoom

BD Diesel Venom CP3 Conversion Kit - Dodge Ram 6.7L 2019-2020 2500/3500 - NO PUMP

1050490

BD Diesel Venom CP3 Conversion Kit

Fits Dodge Ram 6.7L 2019-2020 Pickup 2500/3500

Kit contains NO PUMP

NOTE: This product has the following shipping restriction(s):
  • Not Legal For Sale Or Use In California
Was: $1,996.95
Sale: $1,896.95
Save: 5%
Save: $100.00

Qty:
NOTE: This product has the following shipping restriction(s):
  • Not Legal For Sale Or Use In California
Free Ground Shipping

Description

Go back to a simpler time, when things worked and you could rely on your Cummins fuel system. Since the introduction of the common rail fuel system in 2003, all Dodge 5.9L/6.7L Cummins Rams were equipped with a reliable Bosch CP3 high pressure fuel pump. Then in 2019, Cummins made major changes and switched to a Bosch CP4.2 pump which has seen its share of problems in the GM and Ford Applications. Due to the CP4's lower volume output, Cummins had to increase the drive ratio of the pump and turn it faster to keep up with fuel demand! By installing a CP3 with the BD conversion kit, you can take advantage of this overdrive. The CP3's larger volume combined with this increased drive ratio allows you to supply more fuel for increased power potential! The CP4 is also susceptible to catastrophic failure. When disaster strikes, the entire fuel system requires replacement after metal debris from the failed pump spreads throughout. Cleaning the tank, replacing lines and injectors, and, of course a new pump can end up costing you in excess of $10,000 in repairs! Prevent a costly failure, increase power and add durability by backdating your Cummins to a CP3 with a conversion kit from BD Diesel. This kit comes with everything you need for install, and does not require tuning! Kits are available with or without a stock CP3 pump, and, is also available with a high performance R900 stroker pump.

FEATURES

  • No Pump Kit
  • Designed for use with Duramax Style CP3 pump
  • CP3 pumps 25% more volume than CP4
  • No tuning required
  • EPA complaint
  • Also available with an R900 Stroker pump (# 1050651)
  • No core charge
INSTALL TIME

  • 3 Hours
  • Longer install time with Cummins model CP3 pump
WARRANTY

Parts

  • 12-Months
NOTE

  • Conversion is EPA compliant on its own - any additional alterations to fuel system (tuners/programmers/injectors) may not be EPA compliant
  • Not for sale on licensed California vehicles
EMISSIONS

  • This product has met EPA's reasonable basis requirements and is legal for sale and use within the jurisdiction of the federal EPA. (EMS:2)

Details

  • 1050490
  • 1050490
  • 990011408974
  • BD Diesel
  • New

Shipping Information

  • Item Requires Shipping
  • 4.0 lbs.
  • W12.0000” x H6.0000” x L12.0000”
  • Free Ground Shipping

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.